#30 Pilot for #40 Hole

Now and then I make a mistake and need to drill a #30 hole to line up with one or more parts that have already been opened up to #30 final size. Rather than just drill #30 with no pilot and have a rough hole, I take three steps: 1) start a #30 hole using the predrilled parts for alignment, but drill just deep enough to make a good centered mark, 2) use the mark to drill #40, 3) open up to a perfectly centered, smooth walled #40 hole.

Views: 295

▶ Reply to This

Replies to This Discussion

Permalink Reply by Michael Chesney on November 3, 2016 at 7:56pm
Good tip!

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service