Online Community of Zenith Builders and Flyers
Tags:
If (and that's definitely if) your FWF kit uses the stock filter Jabiru uses for the Bing carburetor (Ryco RAF17), the K&N equivalent should be the 33-2031-2. But since FWF kits can vary, you should verify dimensions carefully before ordering.
Depending on the source, the original filter is also listed as a Repco RAF 17.
The K&N filter that came with my FFW kit from Jabiru USA is an 33-2008-1 Hope this helps. As always your results may vary.
That might be your best bet. The NAPA cross references to the 2031, but since you said the NAPA doesn't fit, John may have the one you want.
Thank you so much
Thank you so much for all the reply's The K&N 33-2008-1 seems right as its measurements
Height | 1.625 in (41 mm) |
Outside Length | 6.625 in (168 mm) |
Outside Width | 6.625 in (168 mm) |
Make sense as the air box I have is square.
RYCO A1348.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).