How does the exhaust pipe attach to the muffler?  I thought it was retained by the two springs but I just received the UL Power exhaust pipe from Wicks and it is just a regular pipe with a dogleg bend.  It does not have any attachment points for the springs like are on the muffler???

Views: 220

Reply to This

Replies to This Discussion


  There were no attachment points for the springs on the exhaust pipe when I received my engine either.  They did send those u shaped wire “attachment points” (I don’t know what you call them) with the hardware for the engine.  Then you welded them on where you wanted them.  I assume the idea was to line up the springs after you position the pipe through your cowl so that the springs are pulling in a straight line and correct tension. That’s just my assumption. If you mark where the spring should  attach, a muffler shop should be able to fabricate a hook out of heavy welding wire and weld them on.

Thanks, I purchased this as a partially completed kit with the engine already installed.  The exhaust pipe was missing.  I ordered a new exhaust pipe from Wicks and they sent just the exhaust pipe with no attachment points.  Common sense should tell them that if someone is ordering an exhaust pipe the attachments should be included!

Scott, fabricate some clips with 1/8 S/S welding rod.  A vise and a drill bit of appropriate diameter for the 180 bend, clamp in vise and beat the angle into the bend for the spring hook.  I had to make a couple recently when I had the cracked muffler.  The clips are hard to find online or will take forever from UL Power.  You can make them in about 10 minutes. Or... go to any muffler shop  as Robert suggested.  HTH - Dave



New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service