3D print Corvair bore covers during engine rebuild

I played around in TinkerCad over the holidays.  Here are a couple files you can 3D print to create bore cover to keep dirt out of your case while assembling/building it.  I created covers for the cylinder and pushrod tube bores.

I tried to optimize them a bit for a faster print.  I prefer to print them in PETG as it is more durable than PLA.

Note:  Every printer is a bit different and calibration my be off.  If it does not fit correctly try using a minor scale adjustment in your slicer

Views: 38

Attachments:

▶ Reply to This

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2025   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service