Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
601 Subaru engine mount needed
Replies to This Discussion
-
Permalink Reply by Jerry VanNuil on
-
Jeff, I have one that I'll sell, what's it worth to you?
Give me a call tomorrow. 616-886-8569. Thanks. Jerry
-
-
Jeff, I laid the mount on the floor and measured up to the mounting pads. This mount has right hand and down thrust built in to it. Looking at it from the top the upper left pad is 9" the upper right is 9-3/4" The lower left is 7-3/4" and the lower right is 8-1/4" The distance between the firewall mounting holes, upper is 33-3/4" lower is 23-7/8" all measurements are approximate, kind of hard to measure. Looks like the distance from the firewall to the attach points is about 8-1/2"
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
