Replies to This Discussion

Permalink Reply by Wesley Roche on December 23, 2023 at 9:58pm

Steve, have a tilting canopy with the frame available that was removed from a 601XL.  Located in northern Idaho.

• ▶ Reply

Permalink Reply by Steve Martinez on December 24, 2023 at 1:23pm

Couple questions come to mind

1. Condition
2. Cost
3. How can we get it from there to KC area

• ▶ Reply

Permalink Reply by Wesley Roche on December 24, 2023 at 4:57pm

1. Good condition - was removed with <10hr on tach.  There is a little surface corrosion on some of the steel components.  Pictures attached.  

2. $750

3. Try UShip, shipping from 83864.  If you're patient, you can sometimes find good deals.  If you don't already know the dimensions, I can send those to you.  Also I have lots of other 601 parts if interested - could possibly ship together or make it worth a summer vacation to in the inland northwest. :-)

Attachments:

• 20211108_091452.jpg, 2 MB
• 20220122_172932.jpg, 1.7 MB
• 20211108_091538.jpg, 2 MB

• ▶ Reply

Permalink Reply by Steve Martinez on December 25, 2023 at 12:18pm

what are the demensions

what are the additional parts & what are you needing for them? 

what is the rectangular on the canopy?

contact info

• ▶ Reply

Permalink Reply by Wesley Roche on December 26, 2023 at 10:14pm

Hi Steve, I'll try to get dimensions tomorrow. I believe the rectangle on the canopy is a hand-hold for pulling the canopy down to close.  Additional parts listed below, open to offers...

All flight surfaces except wings (electric trim servos installed), flap motor, instrument panel with some instruments, landing gear (gun drilled for hydraulic brakes), Composite wingtips, composite cowling for O-200, O-200 engine mount, flight control cables.

I'll message you my contact info.  

• ▶ Reply