Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
650 taxi & landing light replacement
when you unscrew the screws that hold the plastic lens in place, you cannot get to the par 36 lamps. The lens will not come out of the hole that was cut into the leading edge. Has anyone made the left fiberglass wing tip a two piece part and then used screws to hold the small riblet that's on the outboard side of the light assembly. This would allow a person to slide the plastic lens to the right so the lamps could be replaced plus no rivits will be removed.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
