701 four position Flaperon positioning

I am installing the four position flaperon kit from Zenith on my 701. The mounting instructions call for it to be in the middle of the access hole under the seat this puts the position of the flapper leaver under the right leg has anyone else ran into this problem. Can it be moved slightly to the left to make it more in the middle of your legs?

Views: 183

▶ Reply to This

Replies to This Discussion

Permalink Reply by James Ballenger on May 29, 2021 at 1:34pm

I have mine mounted in the center of the hole under the seat and looked this morning while I was flying. The handle is centered between my legs.

Jim

Permalink Reply by Andrew Rauert on May 29, 2021 at 6:58pm
Thanks Jim for responding I ended up moving my leaver 20mm to the left which brought it about in the middle of my legs. Zenith said this would be fine as there is a fair amount of room through that access hole.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service