Has anyone else had trouble bending the skins to fit the flaperons? I had a horrible time and eventually ended up "crinking" the trailing edge on one and having to reorder the part! The holes did not match well with the ones on the spars. The worst problem is that the skins are 2-3mm too long at each end and have to be trimmed to allow for proper fit.

Views: 845

Attachments:

Reply to This

Replies to This Discussion

Ed,

No. Not the entire project. I plan for flush riveting only in the area of top skin from leading edge to spar for flaperons and wings, and, may be, same of under skin for horizontal stabilizer and elevator. There is no real gain to do it on the whole Sky Jeep. Stainless steel blind rivets are made and available locally at cheaper price than aluminum Avex. I am well aware that they are harder to pull and I do not want to injure my elbows again. I used to see powered rivet gun around locally, but when I look for it I have not found one.

Happy Thanksgiving.

Champ

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service