Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
750mixer bearing support
Two bolts are of center
Replies to This Discussion
-
Permalink Reply by John Weigel on
-
There was a post in the 750 blogs a month or so ago. The pictures in the assembly guide show the "short" side up and the tab between the bolts. In the blog they say it should be the other way around so the bolts do not act as a stop. Search the blogs for the posting.
-
-
Here is the link to the discussion.
http://www.zenith.aero/group/stolch750/forum/topics/mixer-bearing-7...
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
