Have some questions about the rear wing brackets. My upright brackets and f4-4 brackets are drilled for A6 rivet.the header is drilled for A3 rivet. Has anyone had this problem and if so what can I do about correct alignment.

Views: 320


Reply to This

Replies to This Discussion

That sucks. I'm guessing you got the final drilled bracket from the Cruzer version.  I'd call Zen and ask them to send you the properly drilled bracket for your kit. That's too critical a part to be screwing around with!  Are both of your brackets final drilled?

Yes both brackets are his way. I'll zenith to confirm what to do on this. I'm thinking new side brackets as well
Please let us know what Zenith says as I am at the same step and my parts are the same. Thanks.
Called roger and his comment was to drill out the holes in the header.
Remove the 4-4 brackets and drill the holes in 75f3-7 then install the 4-4 bracket. This method worked great little to no alignment issues.


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Homecoming Tshirt:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2023   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service