Online Community of Zenith Builders and Flyers
Hello all, I am building a 601 xlb and I am second owner. first owner used a clear sealer? on all the seams where alum touches alum. no total surface sealer on inside of wing. I live in NW area and salt water will be near. what is my best option for sealing my surfaces and so i need to seal every seam as I go or just the whole wing when its ready to be re-skinned? Any help would be great!
Mark
Tags:
Hi Mark
look into Corrosionx, I believe that it is used on a completed airframe. They use a system where you spray it into areas like the wing and it coats everything from what i've read.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).