Replies to This Discussion

Permalink Reply by Bill W. Proctor on April 9, 2009 at 1:23am

Dr. Olds III;
I purchased an angle drill kit from aircraft spruce (aircraftspruce.com). I found it satisfactory for the tight spots building a ch-701. It has several drill sizes and lenghts and replacement bits are also available from aircraft spruce. It attaches to the chuck on your portable or corded drill. Bill Proctor

• ▶ Reply

Permalink Reply by Dr. Edward L. Olds III on April 9, 2009 at 10:43am

Bill,

Thanks for the response, I'll call them. I seem to be spending half a fortune on kit parts and the other on tools! I'm certainly OK with that, but my wife takes a dim view.

Ed

• ▶ Reply

Permalink Reply by Dr. Edward L. Olds III on May 13, 2009 at 11:44am

Bill,

Thanks for the info. Looks like I'll have another bill at Aircraft Spruce! What is the status of your 701?

Ed

• ▶ Reply

Permalink Reply by Tommy Walker on April 9, 2009 at 3:25pm

Hi Ed,

I have both the ACS angle drill attachment and an air powered angle drill. I don't use the ACS angle drill any more.

I will try to attach a picture of the air powered drill.... It is/was available on Ebay, Store Name: TOOLSEZ

I bought an inch-lb torque wrench from Harbour Freight and test it annually.

Tommy Walker in Alabama

Attachments:

• DSC00048.JPG, 2.1 MB

• ▶ Reply

Permalink Reply by Dr. Edward L. Olds III on April 9, 2009 at 5:34pm

Tommy,

Thanks so much for the response and the picture. That helps a whole bunch. I was able to borrow a torque wrench from one of my buddies at the airport, so that is a savings.

Ed

• ▶ Reply

Permalink Reply by Tommy Walker on April 9, 2009 at 8:49pm

Oops...

I meant to include, I will sell my ACS angle drill for 1/2 what I paid for it.

Anyone interested let me know. Shipping is extra.

Tommy Walker in Alabama

• ▶ Reply