Replies to This Discussion

Permalink Reply by R Michael Moore on October 19, 2022 at 9:21pm

The Viking YouTube Channel has two that I found and also a seven video series on the installation.

https://www.youtube.com/playlist?list=PLJhtd03am233UJRx7CfIeQE-inQJ...

For specifics on installation numbers and customers you can call the Viking shop.   They will know exactly.

-1- CH750 STOL -   https://www.youtube.com/watch?v=cO7BKWRgIuk 

and  https://www.youtube.com/watch?v=msNppz0hTzA

-2- CH750 STOL Upgrade from Viking 110 after 500 hours -

Part 1  -  https://www.youtube.com/watch?v=SIv9diL7eLs

and  Flight Performance numbers after installation - https://www.youtube.com/watch?v=vCiiQlOShTc

• ▶ Reply

Permalink Reply by charlie rosenzweig on October 22, 2022 at 5:46pm

Viking does a very good job on their videos.   I bet there will start to be some builders out there who will choose to use that engine for their Zenith builds. (full disclosure I am very familiar with the R18 engine). 

Thank you for the links!

Charlie 

• ▶ Reply

Permalink Reply by Jan Eggenfellner on October 24, 2022 at 11:59am

Hey Charlie, we have about 50 out there with the Viking 150s now on Zeniths. I don't think anyone has done their own cowling as of yet, but most want the kit we supply. As stated above, most of the videos show the cowling. Here is one setup shown from the recent Zenith Homecoming doing demos.  

• ▶ Reply

Permalink Reply by charlie rosenzweig on November 28, 2022 at 8:31pm

Thanks Jan,

Hope to hear from the folks using this 1.8L engine on the Weight and Balance numbers. Just guessing/hoping that these numbers turn out well.    

Charlie 

• ▶ Reply