Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Canadian Wooden Prop (36X68) - $250
New (only tested) with 6 hole pattern crush plate for Rotax 532/582 engine or for left hand tractor application (64 hp +/-) striplic@tetric.com 512 924 4199
- Attachments:
-
-
IMG_0353.JPG, 1.8 MB
-
Replies to This Discussion
-
Permalink Reply by Gil DeVault on
-
I wonder if that would work on a kitfox? how much to ship?
-
Permalink Reply by Cliff Stripling on
-
Gil,
The prop was supplied with a Rotax 532 engine which I never used. I traded that engine for a Rotax 582 engine. I test ran the Canadian prop once on the 582 to discover that it was underpropped (6800 rpm static for my 582). I don’t know what combination or what application you are using so can’t say more.
As far as shipping, I am not sure. I haven’t packed it yet for shipping to take down to the parcel/post office and check.
-
-
I have a 582 on my Kitfox project. I guess if you over powered it with your 582, so would I. Thanks for the reply
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
