Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Carbon Fiber Cowling for my ULPower 350is powered STOL CH-750
I was told my cowling is the third one off the molds from Aviation Composites. I'm starting this thread to show chart my progress with installing it.
Replies to This Discussion
-
Permalink Reply by Timothy Aanerud on
-
The stock tube coming out of the muffler doesn't fit on this cowling. it touches the bottom of cowling before the bend with the left side of the cowling hanging down, nor is it long enough to exit the cowling immediately either.. So, I'm going to have to get a new one made. Probably out of polished Stainless. :-) Time to call Ray or Robert to find out the correct size and material. My guess is that it's 1.75" 16 gauge 304 stainless steel. Or it could be that fancy metric 44.45mm by 1.5mm steel tubing. I think this will be a whole lot easier than cutting into the cowling. I don't think flipping the tube around the other way makes sense.
- ‹ Previous
- 1
- 2
- 3
- Next ›
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
