Construction Sequence

I am trying to rivet the wing skeleton together and notice that the construction manual, section 75-WA-1 says to deburr and rivet the skeleton together.  However, section 75-WA-2 shows the skeleton as not being riveted yet?  Does it matter or is the alignment and squaring of the wing going to be thrown off by doing the riveting before I square things up for the wing skins?

Views: 225

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jim Derickson on April 28, 2010 at 8:25am
It's been a while, I riveted the skeleton together as per the manual then leveled and checked for twist along the spar. Make sure you have a good level for this.Also it is important that your blocks don't move around. I used a torpedo level as once the nose skins are in place anything longer won't fit.Remember not to drill to final size any rib or spar that has a ajoining skin when the builders guide says to drill to final size. ( been there done that ) I enjoyed constructing the wings, have fun, Jim
Permalink Reply by Dr. Edward L. Olds III on April 28, 2010 at 8:49am
Jim,
Do you mean don't drill to final size any rivet holes for skin? When do you do it?
Ed
Permalink Reply by Jim Derickson on April 28, 2010 at 1:29pm
No . Drill when the guide indicates to do so, just remember that there are outboard skins . Where the skins overlap you will want the holes left at 040 so you can cleco in place. Sorry for the confusion, Jim
Permalink Reply by Richard Benson on April 28, 2010 at 7:49pm
Ed,

I'm working my way through the 750 wing kit and have found Jon's HBH Videos to be invaluable. The best feature is seeing the correct sequence so that you don't "build yourself into a corner". As a first time builder, I wouldn't have considered this project without these videos. ....and no, I'm no relation to Jon!

Enjoy the build,

Rich
Permalink Reply by Dr. Edward L. Olds III on April 28, 2010 at 9:28pm
Richard,
Thanks for the reminder about the videos, I've been told they are great, but haven't popped for them.
Ed

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service