Cordless Rivet Guns

As I prepare to order my kit I am looking at options for pulling the rivets.  

Specifically, the Stanley PB2500 that uses Dewalt batteries.

Do any of you expert builders have any experience with these and are they recommended or not recommended and why???

Thanks in advance,

Heath

Views: 518

▶ Reply to This

Replies to This Discussion

Permalink Reply by Perry Delano on April 21, 2022 at 8:14am

Nose Pieces for any rivet gun are easily made.1/2 " or larger 135 deg bit, heat rivet nose piece if necessary. drill concave  until you can get no mark on rivet (drill deeper), no mark on test piece of skin (drill less or file). Polish with scotchbrite. Always good to keep non modified heads on hand as well.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service