I will be removing the corvair from my 750 and replacing it with a rotax next week. The corvair has 55 hours on the bottom end and 1 hour on the top end.  I started the engine and flew the pattern today (7-16-16) to put an hour +- on the engine after head and cylinder work. The engine wasn't pushed to hard since this flight is part of the break-in period.  I posted a few short videos on my Zenith page. 

Engine 2700 +.030

Weseman 5th bearing

Nitride and tapped crankshaft -.010

forged pistons

new OT-10 cam

MA3-SPA carb (has acc. pump) fresh rebuild

WW's hub, top cover, starter gear, ring gear flex plate, maybe some other stuff

E/P distributor w/4 deg offset

Large oil cooler

Stainless exhaust

John Deere type alternator

engine mount fits 750 (could be modified to fit 601)

cowl fits 750/601

Warp drive prop with 66" and 68 " nickle edged blades.

 

I built this engine using ww's book and writings for guidence. It  has been a very good learning experience.

 

The engine will be on the airframe for a few more days.

 

Price:  Make reasonable offer.  Might consider trading for something.  

 

Been asked, "why you removing the corvair"?   Philosiphy change more than anything I guess. That and I am at a point where a new engine will fit my budget. 

 

 

 

 

 

 

Views: 1026

Reply to This

Replies to This Discussion

Contact email:  tdmackl@gmail.com

Tim

Sold everything except engine mount and cowling.  Asking  $200 each for them.

Thanks,

Tim

Still have the cowling and mount Email me at dsteveson@gmail.com

I'm looking for a mount and cowl if they're still available.

Yes.

my email: tdmackl AT gmail.com

Thanks

Hopefully shipping won't  hurt me too bad.

Sent you an email, I'd like to buy both.

Thanks

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service