Anyone have a good technique for making the cut-out on the Dorsal Fin. There doesn't seem to be much documentation on it either in the plans or on the forums, and I only get one shot at this.

 

Roger

Atwater, Ca.

Views: 225

Reply to This

Replies to This Discussion

Dorsal Fin?
Sorry - 701

Specifically what part?

Its the forward fin on the top of the fuselage that extends back to the horizontal stabilizer.  7C6-4
Ditto Harmen.
Made mine out of cardboard first , then eye balled the cutout and cut with scissors, trimmed until it was right ,traced the outline to the aluminum part and went for it.
Thanks guys, sounds easy enough.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service