On my last climb out, my engine starting missing.  No loss of power that I could detect, but a clear miss on occasion.  I landed no problem.  I'm not sure where to start looking.  I see on my EIS, there is a nine pin computer plug hanging out.  Does anyone know can I run a diagnostic tool on this?  It would be great to know if one cylinder was missing or random across all. I've left Jan a message, but it's Oshkosh time, so I assume he will be tied up with that for awhile.

Thanks for any advice in advance.

Richard Cooley

Views: 99

Reply to This

Replies to This Discussion

Sorry, I meant ECU, not EIS.

Richard

Not 100% on this but I am pretty sure that is a "Jan only" plug, for him to program and diagnose the ECU.

I would suspect one of the coil is going bad or maybe a connection is loose to one of them.

Keep us updated as to your findings.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Flying Knuckleheads

Lavion Aero

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2026   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service