Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Flange for Marvel Schebler MA-3SPA
If you are using the above carb you will need a flange to attach the SCAT hose to the air intake. A poster in the general discussion group came up with an inexpensive solution. Part # 10350-10 at Aircraft Spruce can be used to fashion a flange plate by welding or riveting a flat piece of aluminum sheet to it.
If anyone has a better solution I am open to it. This is the last piece I need to complete my airplane. Time is of the essence.
Thanks
Replies to This Discussion
-
Permalink Reply by Russell Johnson on
-
attached is a photo of one I made for my corvair, please note these are not the correct bolts, just temporary.
- Attachments:
-
-
IMG_0113 (640x480).jpg, 77 KB
-
-
Permalink Reply by David Banahan on
-
Good idea, great picture. Did you weld this?
-
-
The flange is held in place with square aluminum flange, no welding involved. The same flanges were used to make the air filter heat box.
- Attachments:
-
-
carb flange.JPG, 51 KB
-
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
