I am almost ready for first engine start with a salvaged O-235 C2C. While doing pre-oiling the blanked vacuum pad started leaking oil. After pulling the blank I discovered a bad gasket.

So the question is:

Should I source a proper gasket?

Or is it acceptable to use high temp form a gasket instead?

I have been unable to find a definitive answer to this one.

Thanks, Matt Stecher

Skydive Houston 37XA

Views: 225

Reply to This

Replies to This Discussion

I’ll jump in first. Couldn’t cost much, order a new one and be done.

Your right, at the time of my original post I had not had any luck finding the part number for the gasket, but further searching turned up the parts catalog for the engine and its the #8313 that I need.

Thanks, Matt

I have torn down several engines that experienced rod bearing failures due to improper use of silicone form a gasket. Small amounts can extrude into the engine oil system and break free. They will pass through the oil suction strainer and block the oil passage in the crankshaft. Use the correct gasket and correct amount and type of gasket sealant.

Matt, listen to Samuel.  Use the correct Lycoming gasket.  If that doesn't work then find out why and fix it, but don't go using silicone, especially on a worn out gasket!  Please!

Don't treat your Lycoming like it's a dune buggy.  There is a wealth of proven history on these engines and it is well known what works and what doesn't.  Forget the prejudice about certified status.  These are good people that have developed these engines and the focus is strictly on keeping them safe.  

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service