Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
SOLD SOLD SOLD From the firewall to the spinner..........all you need
I bought N601LV and updated her to 601XL "B" standards, after 2 years of flying I'm needing a new project so I am starting a re-engine project using lightweight O-200D
2700 100HP corvair, 150 troublefree hours since conversion
5th bearing, Nitrire crank, ND alternator, front starter, WW distributor, MA3 converter carb
stainless exhaust, egts , chts and dynon db25 cable from egt/cht for ems120 or efis180
airbox,
warpdrive prop and spinner, complete cowl, all you need to add is fuel and a spark!
engine featured at WW site
SEE: louis kantors 601xl
set used to prototype 750 install
useable for 750, 601, 650,.... whatever
new engine arrives end of sept. so I can deliver to zenith fly in end of september
cfryatt@sbcglobal.net
- Attachments:
-
-
fwf.JPG, 2.1 MB
-
Replies to This Discussion
-
Permalink Reply by christopher fryatt on
-
Forgot to add Ill be flying until mid September,
If you live in Texas Come by for demo of engine if interested, otherwise Ill part it out eventually
-
Permalink Reply by David Krakowsky on
-
Contact me if you are interested in a prop and spinner off my AMD 601xl 0-200
I switched to a warp drive.
You can reach me at dothetime@hotmail.com
-
-
a member of the board asked for pictures so here are some, sorry but the engine pre_oiler not for sale, photo uploaded in error. If you go to flycorvair.com or .net you will see Ive got ALL needed to set up and run in your airframe just provide fuel to carb, volts to starter and coil to distributor, There ya go, all nuts bolts cowls etc, already setup ,bolt mount to firewall....
https://1drv.ms/a/s!AvcwFXFLk8Iv22OhfmM3KMTanVuP
-
Permalink Reply by Charles Miller on
-
Very tempted to buy the FWF. Right now I'm just looking for the mount and cowling. How much for the package?
-
-
on barnstormers now with pics $8500...act now if you would like delivery to zenith factory fly-in end of this month, WW will be there and I can arrive at start of covair "college" if you wish
-
Permalink Reply by Mike Armstrong on
-
Has the engine sold yet? I will be in Mexico the 23rd on. Was meeting with WW to evaluate my core etc, but this might be a great alternative. Thanks Mike Armstrong 719 466-3101. Feel free to text or call
-
-
SOLD SOLD SOLD
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
