Hi everyone!

I have a 601 XLB and I have installed new GRT Sport EX EFIS.  I installed the magnetometer with heavy velcro, about 4 ft behind  the passenger seat on the side of the fuselage above where the "large access" bottom panel is located. I know there are the elevator cables there, but they are at least 18 inches from the magnetometer and  I can't get it to calculate!  I spoke with GRT support and they said there is magnetic interference taking place.  I used my phone with compass to try and see any magnetic field and it didn't move much.  I know ideally, GRT recommends out on the wing, but that wouldn't be possible.  ANY thoughts or suggestions are appreciated! 

Views: 94

Reply to This

Replies to This Discussion

Hi Steve, 

I had success mounting the mag. on the second rib in the leading edge on my 650. There is nothing  in that location to interfere with calibration.  It was easy enough to fish the wire leads though the ribs and side wall temporarily  to see if the calibration would work afterwards i attached it with 3m scochweld double face tape.

Best of luck to you. 

Phil 

Thanks Phil, That's where I'm looking to place it!  I moved it from the back and just set it out there on the wing and it  picked up the correct heading! 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service