Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Help ID unidentified part
Hi, All;
I'm working on the aft fuselage sides, and I've been skipping forward in the plans just to see if there's anything I can rivet in place at this time.
I found some holes on the fuselage sides that don't correlate to anything I'm aware of.
Please see the pic below. From what I can see in the C75-FA-x pages, it's never mentioned.
Thanks!
- Attachments:
-
-
IMG_3469.JPG, 881 KB
-
Replies to This Discussion
-
Permalink Reply by Loren Warner on
-
To me this looks like the L-angle which supports the aft end of the flaperon control's mixing bar bearing block.
-
Permalink Reply by Carl Orton on
-
Well, duh..... Thanks Loren! I looked all thru the "fuselage" parts/drawings/builder guides and could never find it. Then once you mentioned, it, there it was in the "controls" portion of the plans. To make matters worse, there are no CRUZER builder guides available, so I had to go to the website for the 750 and there it was - 303 mm long.
-
-
You're welcome. I didn't realize Zenith did not provide a builders guide; that sucks.
On another matter, if you plan to install a 4-point harness, you might consider not adding the upper harness support as it slightly disfigures where the skin rivets to the longeron. At least it does on the STOL.
-
-
Good tip on the 4 pt harness. Thanks.
I realize now what I typed. Yes, CRUZER builder guides are available and online. Well, MOST of them are. All the controls-specific instructions, as well as the fuel tank, are not available for the Cruzer, so those are the ones for which we have to use the STOL version.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
