Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Intake flange for Marvel Schebler MA3
I am building a Corvair powered Cruzer, and I just got my MA3 carb. The intake side needs a flange that I can attach a 2.5 inch scat tube to. It has a bolt at each corner. I need to find a suitable flange. Does anybody know a part number for this?
Replies to This Discussion
-
Permalink Reply by Russell Johnson on
-
I had to make one for my MA3 carb.
-
Permalink Reply by Dennis Hutchinson on
-
Joe,
Aircraft Spruce sells aluminum flanges of various sizes. They have one with a 1" height, 3.5" diameter flange for a 2.5" diameter for the tubing, Part Number 10350-10. Don't know if it would work without some modification.
Dennis
-
Permalink Reply by David Banahan on
-
Great answer.
-
Permalink Reply by Dave Gardea on
-
Joe,
I think I made mine as well if I recall using one of the flanged tubing pieces (like in the link below) riveted to a flat plate of aluminum. Regards, Dave
http://n631dg.000webhostapp.com/engine.html#18
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
