Replies to This Discussion

Permalink Reply by Don Burkholder on July 13, 2020 at 9:32pm

I have not. But, for the 3300 two outlet pipes would be nice..

• ▶ Reply

Permalink Reply by Joe Donohue on July 13, 2020 at 9:40pm

When I ordered it I was asked if I wanted one pipe or two, I told them one not none.

• ▶ Reply

Permalink Reply by Carlos Sa on July 15, 2020 at 4:25pm

Mine came ready to install, one outlet...

• ▶ Reply

Permalink Reply by Raymond Woods on July 19, 2020 at 12:16am

My muffler arrived like this, it is so it can be fitted to any aircraft. The best way is to fit the muffler and cowl, sharpen the end of a long rod and position it on the muffler to miss everything give it a tap to locate bottom hole, cut hole and repeat for top hole, the pipe on mine went through the muffler and was welded both sides.

• ▶ Reply

Permalink Reply by Michael radtke on July 25, 2020 at 1:21am

hi joe,

   how bad was the first muffler cracks? where were they? could it be repaired? do you want to sell it?

michael radtke

• ▶ Reply

Permalink Reply by Joe Donohue on July 25, 2020 at 9:20am

Cracks where the exhaust pipes connect. I had one side welded. Sure I’ll sell it

• ▶ Reply

Permalink Reply by Michael radtke on July 25, 2020 at 11:25am

hi joe,

    contact me at 

ph 7074787135

email sacman42@aol.com

thanks michael

• ▶ Reply