Landing gear Fork New design Attachment bolts

I haven't had any luck finding instructions on the website for the new type forged aluminum (rounded) fork, which I just bought. The instructions I found relate only to the old square fork.

Do I assume correctly that you start with a #40 and open it up with a 1/4 inch hole?

Which specific (AN) bolt do you use to attach the fork to the strut?

In the present configuration, the bolt in the rear center position scrapes the tire. I presume I'll avoid that with the new fork.

Wayne Tyson

Views: 509

▶ Reply to This

Replies to This Discussion

Permalink Reply by David J. Beaulieu on August 31, 2014 at 4:56pm

Wayne

My version 3 plans show (4) AN4-10A attaching the lower curved plate of the front tube to the fork.

Is the curved plate on your current tube similar to the curvature of the new fork?

There is also a 6.4mm drain hole on the plate...

Good Luck...

Dave

Permalink Reply by Wayne Tyson Jr on August 31, 2014 at 5:32pm

Thanks, Dave. I appreciate your help. I bought a new tube and fork, so they are compatible. Do you know why the "old" flat plate and fork had six bolts and the new one has four? Maybe to keep the center bolt from cutting a groove into the tire? It's strong enough I guess, with enough system redundancy?

Wayne

Permalink Reply by David J. Beaulieu on September 2, 2014 at 8:42pm

Wayne,

Really don't know anything about the old flat plate and fork...

I think precisely locating the holes is the biggest issue you will face with the new fork. I see that some people have also inserted the bolts "upside down" to allow more tire/hardware clearance.  I stayed conventional with bolts pointed down with nuts between tire and fork.

Good luck!

Dave

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service