Layout 750 spar

Has anyone building from plans had a problem with the rivet layout and spacing where the doubler is on the spar. If so what was the correction you made. I've tried several times and it doesn't come out rite for me. Any help I can get, Thanks Dave Ruhe

Views: 142

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ron Lendon on May 9, 2010 at 8:28pm
Use a rivet fan and make sure the end holes are spaced from the edge correctly, If the fan won't reach both ends, put one more pilot hole in the middle. Always make sure the rivet spacing is either to the dimension or less. You may end up putting more rivets in but they will be equally spaced by using the rivet fan. Just pilot drill the end holes, silver cleco the rivet fan with the spacing, pilot drill right through the rivet fan. The fan I have is stainless steel and hasn't worn any in 5 years of use.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service