Gentlemen, can someone direct me to the "A.D." put out a few years back regarding modifications to the above topic? I recall it was once in the forums, but I cannot find it and I admit to operator error.
Thanks - Jimmy Young
Tags:
Jimmy, I think this is what you're looking for, lots of info in this thread started by Joe Harrington. I ended up doing the mod as well on my Cruzer...turned out really well.
Roll and Pitch Control Separation - Zenith Aircraft Builders and Fl...
Don, I believe this thread is about divorcing the elevator controls from the flaperons if I'm not mistaken. The one I am looking for is the A.D. pertaining to adding a bolt and castellated nut thru the tube steel at the torque tube-elevator bell crank area. The A.D. may have originated from Zenair in Canada.
I found it on the Canadian Zenair site. Here it is should anyone need it.
http://www.newplane.com/Service_Letters_Bulletines/SAFETY_ALERT_Feb...
All of the continuing airworthiness information for Zenith is at www.newplane.com
You can find that bulletin there.
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).