Replies to This Discussion

Permalink Reply by mauricio rocha on June 4, 2010 at 11:13am

sure sure!
thanks, i dont know if the kf will fit, but if not i can adapt it..
appreciate it if you can ask.
my email is
rocha@medicentro.com.mx

thanks!
mrg

• ▶ Reply

Permalink Reply by Taylor Ogden on June 10, 2010 at 1:29pm

In regards to building a belly pod, check out my album. http://www.zenith.aero/photo/album/show?id=2606393%3AAlbum%3A37268&...

This was for an 801 but your's would just be a bit smaller...
I did some looking for plans/kit for pods and came up empty. Roberto Brito (http://www.zenith.aero/profile/RobertoBrito) is building some out of carbon fiber, but I never could get him to commit on pricing/availablity so we just built one ourselves.

Not a difficult mod and really cleans up the bottom of the plant compared to having the landing gear and stuff hanging out there... No compound curves. Only thing I think we'd do different if we made another would be to add an inch or two of depth. but that depth may work OK for a 701...

• ▶ Reply

Permalink Reply by mauricio rocha on September 19, 2010 at 6:04pm

thanks so much, sorry for a late reply, i was out of town.
do u think it must be built using aaluminum, (metal) like the plane?
i cant find anyone here that know how to use fiberglass.

• ▶ Reply