New to the Zenith 701 On floats !

 Hey there, I’m new to this forum and also to the Zenith 701  which I just purchased On amphibus Floats . It’s a 2008 with  the Rotax 912 ULS  have not flown it yet, just did a pre-purchased and  sending out the Dynons for rebuild and update .  

I am a high time Pilot with very low time on floats and   no time with zenith 701 .  Any words of wisdom would be greatly appreciated before my first flight . 

Views: 1016

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ken Ryan on May 5, 2018 at 4:15pm

Don't forget about the wheels.

Permalink Reply by Brandon Scott lewis on May 5, 2018 at 4:32pm

Thank you! 

Permalink Reply by Victor Menkal on May 5, 2018 at 5:47pm

Hi Brandon.  Congratulations on new aircraft.   If you have never flown a 701 you are in for a treat!

As float plane drivers we are always cautious about amphibious floats but there are lots of aircraft flying safely with them.   With the dynon very simple to add gear warning system tied to aircraft speed and a visual back up really helps as well.

The big advantage with the amphibs is that you will be able to get experience with aircraft handling before you get wet.    Not sure if anyone does 701 float transition training but suggest scan membership and contact owners directly.      Easier than type certification as pilot only needs to have commercial float rating and does not need to be a CFI but check for your jurisdiction.    CFI obviously recommended for type rating or equivalent on wheeled 701.

I transitioned with a high time commercial bush pilot with LSA microlight experience.

As most landings with 701 are power on, quite similar to float landings that you are familiar with.      

You can ditch the slats if equipped as obviously we do not do extreme AOA approaches or take offs with floats.   VGs are a nice addition.

Assuming you are running a 912 you have tons of power due to relative light weight of the A/C.

Have a great time, look forward to your reports.

Once you go floats you never go back!

Cheers Vic

Permalink Reply by Brandon Scott lewis on May 6, 2018 at 7:23pm

 Hey Vic,

Thank you for the words of wisdom and I  look forward to getting into the 701 for whole  new experience, with the Dynons , (d100 & d120)  they’re going to the factory for repairs and new firm ware. Will they put the gear warning at that time or is it something I programme in? We do have slats and have VGs on the elevator . Again thank you Vic for you input!!

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service