Oil seperator

Hi,

     Building a 750 with an 0-200A  that came without the oil separator for the vacuum pump so I’m looking for one at the moment.

 Thanks 

             Tom Carlin 

Views: 29

▶ Reply to This

Replies to This Discussion

Permalink Reply by Carl Orton on April 11, 2025 at 5:21pm

Although I overhauled the O-200 in my Cruzer, I’m unfamiliar with an oil separator for the vacuum pump. I left mine off and installed a block off plate. If you’re talking about a separator that attaches to the breather line, some folks install an Aerobat (Cessna aerobat) elbow where the breather comes out of the crankcase. You can also make your own just by welding a short length of pipe to the breather. Lots of posts on how to do this, lengths etc. Still others (me included) don’t fill the oil all the way. O-200s will blow out excess oil until the level gets to where the engine likes it. Mine loves 4.5 qts. 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2025   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service