I picked up a Pmag for my 0-200

any suggestions on where to get a manifold pressure connection?




Views: 261

Reply to This

Replies to This Discussion

intake manifold above carb, you'll see 2 ports. 1 each side. one might be used as primer in your install

Thanks Christopher
I’ll take a look there.

got it plumbed? can also T-off if you want MP...if MP might wander a bit unless an orifice installed

I see you have D-180 hook up to mp sensor and you get % power with a fuel flow counter installed

My right slick mag crapped out so I finally installed my Pmag
Did a 1/2 hour test flight, all good so far
Further testing next.
Hope to find another Pmag for the left side, anyone have one they want to part with?
I believe my 4301 slick needs a new distributor cap and gear, I’d like to find those parts for a backup, cheap!
500 hour inspection kits are ridiculously priced.
Any suggestions?


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service