Replies to This Discussion

Permalink Reply by christopher fryatt on July 1, 2020 at 12:35pm

intake manifold above carb, you'll see 2 ports. 1 each side. one might be used as primer in your install

• ▶ Reply

Permalink Reply by David Krakowsky on July 1, 2020 at 12:37pm

Thanks Christopher
I’ll take a look there.
Dave

• ▶ Reply

Permalink Reply by christopher fryatt on July 6, 2020 at 8:43am

got it plumbed? can also T-off if you want MP...if MP might wander a bit unless an orifice installed

I see you have D-180 hook up to mp sensor and you get % power with a fuel flow counter installed

• ▶ Reply

Permalink Reply by David Krakowsky on September 19, 2020 at 11:37am

Update
My right slick mag crapped out so I finally installed my Pmag
Did a 1/2 hour test flight, all good so far
Further testing next.
Hope to find another Pmag for the left side, anyone have one they want to part with?
I believe my 4301 slick needs a new distributor cap and gear, I’d like to find those parts for a backup, cheap!
500 hour inspection kits are ridiculously priced.
Any suggestions?
Dave

• ▶ Reply