With a cheap bead roller only available on eBay or elsewhere online and the local sheet metal shop not wishing to touch my home-built fuel tanks for fear of litigation, I came up with this rough and ready solution.
Thought I would share it with you. In all I got the device refined enough to complete my tank beads in a weekend.
I used some wardrobe door rollers and made up a couple of hardwood discs simply by cutting them out of hardwood and sanding them on a bench sander to match the large female roller. Then it was just a matter of devising a method to squeeze the material between the two rollers.
So instead of waiting a week for a roller to come in the mail, the job is done and I can move on to the next stage.
Tags:
Here's how I did mine:
I saw your method Dan, and it looks quite effective, but I'm wondering how you did the long runs along the back of the tanks?
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).