propeller for continental 0-200

Hi,

    Has anyone fitted a 68 DIA sensenich wood prop to the 750/ 0-200 combination,I know that zenith recommend 72/44 but in the U.K. the liscencing authority are unwilling at the moment to give approval for anything above 68 in.DIA. And would not give approve the Warp Drive I intended to fit stating problems with cracking in the hub area.

Regards,

               Tom Carlin

Views: 139

▶ Reply to This

Replies to This Discussion

Permalink Reply by David Krakowsky on October 3, 2021 at 9:02am

My AMD factory built 601XL with an 0-200 came with a Wood Sensinich 68x57

i replaced it with an adjustable 68 inch warp drive

dave

Permalink Reply by Thomas carlin on October 3, 2021 at 5:58pm

Thanks David for the reply I would fit the warp drive if I could.

Regards,

                Tom Carlin 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service