Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Radios Panel Mount Troubleshooting
I have an Icom IC-210.
1. Volume control doesn't work.
2. I seem to transmit ok, but sometimes hear the tower 5x5 but sometimes barely at all. There seems to be no pattern.
Before I spend a fortune at the radio shop, I'd like to explore the possibility that I'm just doing something wrong.
Thanks for any ideas,
W
Replies to This Discussion
-
Permalink Reply by Todd Scruton on
-
Is your ribbon cable between the face and head unit ok? It seems there are quite a few problems come from there.
-
Permalink Reply by Bob McDonald on
-
Check the length of the cable between radio & antenna. It has to be cut on the 1/2 or full wave length or it messes up the signal. I forget the length right off the top of my head but I'm sure someone on this forum knows it. Its buried in all the info I have somewhere??? If it works in the radio shop & not in your aircraft, then its some thing in your install.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
