Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Ray Allen Trim connection for Dynon HDX Display
Question for the masses,
I have the Ray Allen Trim Servo and Rocker Switch as supplied in the Zenith 650 kit. For Avionics, I went with the Dynon HDX, using the Advanced Flight Systems ACM.
I am trying to figure out how to wire the Servo to the ACM, and then the Rocker Switch to the ACM, in order to display Trim position on the HDX. Has anyone successfully done this or something similar? I did my best trying to meld the ACM schematic with the Ray Allen schematic but the servo will not operate.
Of note, the servo does work connecting the white & gray wires to a battery.
Thanks!!
Replies to This Discussion
-
Permalink Reply by Bob Simmons
-
Permalink Reply by Jay Carter
-
Have trim indicator on D180. 12V to operate servo. Need voltage fed from Dynon to the servo for indication. Think it's 5V. Using the supplied indicator, 12V covers it.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
