Rear wing ribs

Is there any scratch builders out there that still have the forms for the wing rear ribs who are done with them. If so let me know.

Views: 243

▶ Reply to This

Replies to This Discussion

Permalink Reply by Steven Ward on June 30, 2011 at 6:50pm
What kind of airplane are you looking to build?
Permalink Reply by Eric Shupperd on June 30, 2011 at 8:34pm
A 601xl. I bought a partial kit and the rear ribs had the holes drilled off center. for the right wing
Permalink Reply by Steven Ward on July 1, 2011 at 8:30am
Eric, its really pretty easy to make the forms, I've made all of them for the 750. You can make one form than trace it out and make the second and your done. I really worried about it untill I made the first one and seen that it was really simple. If you aren't able to make one, maybe someone here can give/sale or loan you theirs. Good luck Eric. 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service