Rudder cable terminations

I need to replace my rudder cables on my 701.  The cost of pre-made cables from Aircraft Spruce is minimal so I will have them make them.  With that in mind how would you terminate them at the rudder?

  AN115 shackle on the rudder and a thimble?  That is what I have now and I know it works.

Fork end swagged to the cable?  But I worry about the end of the rudder horn not being in line with the cable and causing the fork end to bind.  but it would sure look nice and clean.

 

Swagged eye end and then 2 short aluminum plates and AN-3 bolts between the rudder and swagged eye.  But then that may bind also.

 

What do you guys think?

Views: 551

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bob Pustell on September 11, 2012 at 6:51pm

If you went with the fork end, you could bend the end of the rudder horn to line up with the cable, put a twist in the end of the horn on each side so that the mounting spot is in line with the line of the cable as it approaches the horn. Just a thought, don't know for sure if it would work but it kinda makes sense. I agree that the fork end swaged onto the cable would make a nice clean looking installation.

 

I await answers from more experienced/wiser builders.

Permalink Reply by David Gallagher on September 12, 2012 at 11:47am

Alan,

 

From what I can see, the 601XL and 701 have a similar rudder connection.  What our plans show is the adjustable turnbuckle out at the rudder connection.  Kind of hard to see in the picture, but my cable ends in a thimble that goes around an eye end on the turnbuckle.  The other end of the turnbuckle is a fork and that goes right to the rudder.  No binding in 4 years of operation.

 

GOod luck,

 

Dave 

 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service