Online Community of Zenith Builders and Flyers
I am making up the rudder cables on the ch750 and I noticed that when the nose wheel strut reaches its full travel left and right against the nylon bearing block that the rudder does not reach the stops that are on the fuselage sides. Is this normal? I feel that I will not be able to achieve full rudder travel. I am wondering if I should remove material from the bearing block so the rudder will hit its stops.Also I noticed that If I adjust the cables for proper tension when the nose wheel strut is fully extended then as the nose wheel strut moves up the rudder cables go slack. Thanks to anyone for their input.
Tags:
Sounds good. I was afraid that I really messed something up. Thanks
Assuming all parts are equal, you will not be able to attain full rudder deflection per the plans for a number of reasons. You'll be lucky to get 19 degrees deflection even after grinding down on the bearing block and nose gear channel before the steering rod's jam nut contacts the slide cover at the firewall. Installing the right brake cylinder support brackets per the plans also restricts rudder/nose wheel travel, as well as full brake cylinder plunger travel. The right fix for the right support bracket's is to turn them 180 degrees.
Much of this was discussed in the 750 STOL forum. Forum member and friend Norm Neuls is currently working on a simple steering rod extension which will allow for even more travel.
Thanks so much
We have full travel in both directions with the bracket turned 180º.
Rudder travel will be limited by the steering gear contacting the lower bearing and steering gear lock nut contacting the firewall. If we knew then what we know now, we would have ignored the drawings specs for full deflection, and attach the rudder stops just before where the steering gear lock nuts contact the firewall.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).