Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Skyview
Hello everyone. I have a question that will be easy for some of you to answer. On my ch650b, I installed the allen ray trim with the LED indicator. After making the connections, everything works very well. When I wanted to program the trim in the skyview, the LED indicator will stop turning on. It still works but I do not have led indicator anymore. Is it just that I can not have led and skyview at the same time? anyone knows why?
Thank you
Mario.
Replies to This Discussion
-
Permalink Reply by David J. Beaulieu on
-
Mario, did you split the sensor wire (green wire?) from the servo or position sensor. My first thought that if you did split the sensor wire to provide two inputs (EMS 220 contact input and the LED position indicator input) from the single sensor output, that maybe there is an associated the voltage drop which is too much for the LED indicator to function. Were you able to set up a trim widget on the Dynon with input through a general purpose contact on the EMS? Dynon or Ray Allen will be the guys to help you troubleshoot further. DISCLAIMER...I am not an electronics whiz - but I got all my Dynon stuff working!
Hopefully someone else will chime in...good luck! Dave
-
Permalink Reply by Mario L'Ecuyer on
-
actually, I split the green wire as indicated by dynon. But I will try something else. I will continue my research to find the solution. I will try to take another 5 volt wire to reduce the power of the current. Thanks for the advice.
Sorry for my english.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
