SOLD Van's Spinner kit FP-13 finished in white Imron for Sensenich metal prop, STILL AVAILABLE 2-1/4" (7/16" bolt holes) prop extension for same. This is the recommended spinner setup for any Zenith using a Sensenich prop and a Lycoming O-235/320 engine.  Used two years on my RV and changed to Catto. Near perfect condition. Planning to use a Catto on my CH 750 so will need a different extension and prop cutout. $220 Tom Muller 207-212-9184 tommuller@roadrunner.com

Views: 188

Reply to This

Replies to This Discussion

hi tomas,

    is the prop extension still avbl?

michael

707 478 7135

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service