Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Throttle and Mixture cable placement and orientation
Would anybody be able to share pictures of how you routed your mixture and throttle cables? I am installing a Marvel Schebler ma3 spa carb.
It seems like most folks rotate it so that the data plate faces the rear, givming the maximum clearance to the front gear. This means you have to route the cables up and put a 180 degree bend on the throttle to bring it back and line it up. The mixture them comes in from the passenger side?
How did you secure your cables?
Joe
Replies to This Discussion
-
Permalink Reply by Russell Johnson on
-
I can't remember the length of cables that I ordered, but next time would order them a foot longer, the bend is a little tight. I did put a fire-sleeve over the cables next to the exhaust.
- Attachments:
-
-
Throttle-1.JPG, 1.2 MB -
throttle-3.JPG, 1.2 MB
-
throttle-5.JPG, 1.2 MB
-
-
Permalink Reply by Joe Pringle on
-
Thanks. Exactly what I wad looking for
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
