Replies to This Discussion

Permalink Reply by Rich Sasko on May 23, 2026 at 6:25am

Ttt

• ▶ Reply

Permalink Reply by Mike Herweyer on June 6, 2026 at 1:14pm

Are you still looking for the pneumatic puller and some clecos?

Mine is collecting dust after completing my CH750 CruZer.

• ▶ Reply

Permalink Reply by Rich Sasko on June 7, 2026 at 8:10am

Yes Mike, looking for all the tools actually, what do you have and what’s your ask?

• ▶ Reply

Permalink Reply by Mike Herweyer on June 7, 2026 at 11:52am

Hi Rich,

Below is a list of what I'm finally able to part with (emotional attachment):

- Pneumatic puller that I bought from Zenith with all the heads for the Zenith rivets (Mint condition - $70)

- 100 Silver clecos ($0.25 each)

- 100 Coper clecos ($0.25 each)

- 200 Black clecos ($0.25 each)

- Clecall steel upright cleco pliers ($ 7.00)

- Strap duplicator (for finding holes and positioning for drilling behind undrilled sheet) ($5)

- Deburring tools (edge, and hole) ($5)

- Close quarter 10 degree offset rivet installation tool ($10)

- Aluminum hand nibbler ($7)

- Camlock pliers for Skybolt cowling fasteners - ($10)

- Parker Rolo 37 degree flare tool for hard fuel lines ($75)

I also have a differential pressure tool for use in Rotax 91x engines, but most Zenith builders don't use Rotax for some reason; possibly the high price?

I have pictures of everything, but the Zenith limit is 7MB, so best to email me directly with anything you want further detail on or pics. 

Please let me know what you may be interested in.

I'm in Michigan, so if you were close buy that would be optimal, but if not, shipping will be at cost.

Regards,

Mike

mherweyer@gmail.com

• ▶ Reply