Zenith 601xlb (650) Parts wanted...

Hi Everyone,

I'm just casting a net to see if anyone here is looking to sell/trade any of the following parts for a 601xlb/650, as my kit wasn't quite complete when I bought it. My financial situation is changing, so I'm looking for economical solutions.

Here's what I'm looking for:

- Analog VFR flight instruments (OR older EFIS's like the MGL Enigma/Horizon, original Dynon, etc)

- Cheap radio like becker or icom or similar

- Cheap transponder (kt76, Narco, etc.) since I'm doing the Echouat for ADS-B

- Antennas for both radio and xponder

- Panel breakers and switches, wiring, etc

- ELT

- Viking or Zenith front suspension

- interior (seats, side panels)

- seat belts (4 or 5 point)

- canopy parts (I only have the bubble, two main arms, and two main mounts on fuselage)

- flap motor/actuator

- elevator trim tab kit (switches wiring and motor)

- fiberglass tail pieces 

- control cables for rudder/aileron/elevator

- brake pedals, master cylinders, lines

- engine and FWF kit 

- and maybe an autopilot if the price is right...

If anyone's looking to move any of the above let me know, thanks. 

Views: 467

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jason Koiter on March 3, 2020 at 1:58pm

Thanks Richard, I may be interested. I'm working on a deal right now for an Enigma EFIS and the guy has the MGL V10 radio that goes with it. If that doesn't pan out I'll let you know.

Permalink Reply by David Krakowsky on March 16, 2020 at 5:38pm

 Richard

i sent you an email on the icom

ill take it if it’s in good working condition.

dave

dothetime@hotmail.com

Permalink Reply by Tim Smart on March 3, 2020 at 2:57pm

Hey Jason,

I have both the left and right horizontal tail fiberglass tips (FTTL &FTTR) with the aluminum 6T1-8 tip ribs.  Never drilled but taped in place when I was building the tail. If interested Zenith is $41 each plus $8 for the two tip ribs.  I’ld like $25 for all plus what it costs to ship.

I’m now in Prescott, AZ so shipping shouldn’t be much (???) but I would have to check.

Permalink Reply by Jason Koiter on March 3, 2020 at 3:57pm

Thanks Tim, I'll take them for sure. I agree shipping should not be too much. I'll PM you

Permalink Reply by David Buoy on March 14, 2020 at 4:50pm

I have a Narco AT 155 TSO'ed transponder with rack and an Ameri-King AK-350 altitude encoder, both working when

removed from my 601 HDS when I replaced them with a Stratus with ADSB (required where I base my plane).

I do not need them so I will gift them to you and your project if you reimburse me for shipping.  Email me at

dbuoy@mindspring.com if interested.  I am in Oregon so shipping should be inexpensive.

Permalink Reply by Earnest Fontenot on March 25, 2020 at 10:52am

Jason,

I have the following you may be interested in:

6B9-1 (1L + 1R) Rudder Pedals
6B9-2 (2) S.S Piano Hinge
6B9-3 (1L + 1R) Toe Brake Pedal

The Toe Brake Pedals are already connected to the Rudder Pedals.

6B9-4 (1) Central Pedal Bearing

6B9-5 (1) Lateral Pedal Bearing (2 req'd I only have one I can let go)

I also have the 3 point seat belts that come from Zenith.

If you are interested in any or all of this contact me at:
504-908-3219
(voice or text)

Earnie

Permalink Reply by Jason Koiter on March 30, 2020 at 2:55am

Hi Earnie,

thanks for the message, obviously things are a little crazy right now but I am interested in some of these things, and will call or text soon.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service