Alan Cameron
  • Townsville Queensland
  • Australia
Share on Facebook
  • Blog Posts
  • Discussions (21)
  • Events
  • Groups
  • Photos
  • Photo Albums
  • Videos

Alan Cameron's Friends

  • Geoff Storey
  • Joe Spencer
  • Jared Morgan
  • Gordon Watkin
  • Joe Harrington
  • Rod Hatcher
  • Allan / Zenair Australia
  • Lex Brown
  • Ian Pritchard
  • Kevin Rudd
  • Phill Barnes
  • Zenith Australia
  • Gary Eady
  • Zenith.Aero
 

Alan Cameron's Page

Profile Information

Aircraft Model
STOL CH 701
Project Status
Nearly done
Building From
Kit
Building Experience
Have worked on airplanes before
Flying Experience
Commercial / CFI
Building and Flying Info / Your Profession / Other Background Info
Commercial Pilot

Comment Wall (16 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 7:18am on July 6, 2015, Joe Spencer said…

Yessir, whatcha got?

jpspencer50@cableone.net

At 3:15am on August 10, 2012, Gordon Watkin said…
Hi Alan. I have scratch built a 701 and currently live in NE Victoria, Yackandandah. I am moving to Townsville in January 2013. Love to have a chat. I have about 130 hours on my 701. I am about to bring it home to make some minor modifications.
All the best
Gordon Watkin.
At 8:35am on June 26, 2012, Joe Harrington said…

Hi Alan,

No, I haven't done the beanie mod. I am scratch building a 750 and decided it didn't really need it because the windshield/roof junction is fairly gradual. Now Zenith have done their own beanie mod to the Edition 3 CH750. I might incorporate their changes.

My idea was instead of forming an aluminum sheet rib like in the wings (as per Joe Spencer's mod), I would use some half inch aluminum tubing and bend it to a rib profile and place it in the middle of the cabin roof and rivet it to the lexan. This would provide some additional stiffness. The tubing that I am talking about is the type often used as wing rib battens used in ultralight aircraft. I have some from an ultralight that I had that received damage to the wings. I am not sure this would work well; just an idea that I had.

Regards,

Joe

At 6:59am on May 15, 2012, Allan / Zenair Australia said…
It would great to see you there cheers Allan
At 6:40am on September 6, 2010, Phill Barnes said…
Hi Alan
Pics as prommised




Phill
At 6:15am on September 5, 2010, Phill Barnes said…
Hi Alan
I will take some specific photos for you toomorow but what I have done is to use the Jabiru fibreglass elbow and a piece of scat hose. I am not happy with the setup and will replace it with a Donaldson air filter rubber hose or similar. Many have done this and some have added an aluminium vane inside to straighten the air with RPM results. Jabiru are working on something very similar at the moment so keep an eye on their website.

I hope this helps and I will get those photos for you but also check out this members photo. http://www.zenith.aero/photo/2606393:Photo:66366?context=user

Phill
At 7:57am on May 31, 2010, Jared Morgan said…
Hi Alan,
Will be down that way towards the end of the month, I will give you a buzz beforehand. Look forward to talking with you soon

regards

Jared
At 12:30pm on May 15, 2010, Jared Morgan said…
Hi Alan,
Just starting out here in Cairns...I am a Townsville boy originally and get home regularly would love to catch up when I'm down that way again...Jared Morgan
At 5:55pm on January 22, 2010, Derek Liston said…
Not enough room on the other comment box! Thought I had your direct email address and phone number but can't find it. My email derekliston @hotmail.com
At 5:53pm on January 22, 2010, Derek Liston said…
HI alan, sorry, I am very slack at keeping in contact! How is your project progressing? Did you eventually get your parts from Zenair Australia? I also had big trouble getting the wheels to hold air, I eventually ended up putting a bead of sikaflex round the wheel halves before joining them and physically pressed the o'ring down into the extruded stuff around the joint. that seems to have worked, at least for the first time ever the tyres haven't gone flat in a week! Right now I'm trying to figure out what size the slots in the fuselage need to be? plus and minus 13 degrees for the aileron and then an extra 15 degrees down for the flap? have you reached that stage yet?
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.