Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Gordon Edgar Burgess
- Wagga Wagga. NSW
- Australia
- Blog Posts
- Discussions (2)
- Events
- Groups
- Photos
- Photo Albums
- Videos
Gordon Edgar Burgess's Page
Profile Information
- Aircraft Model
- ZODIAC CH 601
- Project Status
- Flying
- Building From
- Purchased finished aircraft
- Engine installed (or plan to install)
- Jabiru
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Private Pilot, Sport Pilot (or Ultralight)
- Building and Flying Info / Your Profession / Other Background Info
- I have held a private pilot licences since 1963, Have owned seven aircraft,my last before the Zenith was a Piper DAKOTA for 27 years.
I retired from farming, then became an investor.
- Home Airport (ie. KMYJ)
- Ywg
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Hi Gordan,
I have turned my main gear forward as I have a fairly heavy engine, O-200. For me one at a time getting in but really helps with holding the tail up landing. When first built i had it like yours and the nose really slams down on landing.
Hi Gordon;
I saw your comment on the "Model" page. It would be better to post your question on the "Forum" - "601/650" page where people can respond to you directly.
I have a 601 but the gear is in the normal position so I can't speak directly to the reversed gear scenario. However, I can tell you that a lot of builders deal with the heavy nose/hard nose landing scenario, myself included.
In my case I have a heavier engine that yours (O-235). I finished my plane last year and have 200 hours on it now. All of my initial landings had the nose gear slamming the ground on landing - and I still do it occasionally.
The technique I have learned is the instant the mains touch to pull back on the yoke. And I do mean "the instant". If I have the slightest, split second delay, then - bam!, down slams the nose.
I don't know if the rear facing gear exacerbates the issue or not, Hopefully someone else with your set up will chime in.
Welcome to the board!! And do post your questions on the Forum page - you will get some good answers there.